 |
| Quantity: | |
|---|---|
MI-5000
LNC
Mold Inspection System
| Display | 10” Touch |
| Storage | 32G MicroSD |
| Network | 100/1000 Mbps(RJ45) |
| USB Port | 2 |
| Camera Connection | Standard 2 |
| Protocol | TCP/IP |
| I/O | 3 input points / 2 output points |
| Language | CHT/CHS/EN |
| Parameter Setup | Camera function settings |
| Qty of Modules | 1 camera can set 3 modules |
| Module Function Settings | Zoom in,zoom out,1:1,move,take photo,add,sensitivity,copy,previous point,next point,delete point,etc |
| Report Export | Operation and inspection history |
| Monitor Page | 1. Multi-camera switching display 2. Display inspection results 3. Display I/O immediately |
| Resolution | 1.2 million pixels |
| CCD Size | 1/3” CCD |
| FPS | 30FPS |
| Interface | GigE |
| Lens | f12mm-36mm zoom lens |
| Camera Holder | Ø8mm_1/4 20-6UNC |
| Light Holder | Ø8mm_M6 |
| Light Source | Standard 2 white lights |
| Adapter Plate | Standard 2 BRD19242 |
| Magnetic Stand | Standard 2 groups Ø8mm |
| Magnet Hooks | Angled E36 |
| Light Controller | 2 channels |
| Display | 10” Touch |
| Storage | 32G MicroSD |
| Network | 100/1000 Mbps(RJ45) |
| USB Port | 2 |
| Camera Connection | Standard 2 |
| Protocol | TCP/IP |
| I/O | 3 input points / 2 output points |
| Language | CHT/CHS/EN |
| Parameter Setup | Camera function settings |
| Qty of Modules | 1 camera can set 3 modules |
| Module Function Settings | Zoom in,zoom out,1:1,move,take photo,add,sensitivity,copy,previous point,next point,delete point,etc |
| Report Export | Operation and inspection history |
| Monitor Page | 1. Multi-camera switching display 2. Display inspection results 3. Display I/O immediately |
| Resolution | 1.2 million pixels |
| CCD Size | 1/3” CCD |
| FPS | 30FPS |
| Interface | GigE |
| Lens | f12mm-36mm zoom lens |
| Camera Holder | Ø8mm_1/4 20-6UNC |
| Light Holder | Ø8mm_M6 |
| Light Source | Standard 2 white lights |
| Adapter Plate | Standard 2 BRD19242 |
| Magnetic Stand | Standard 2 groups Ø8mm |
| Magnet Hooks | Angled E36 |
| Light Controller | 2 channels |
The working principles of common B&R modules Input/Output Modules:• Digital Input Module: Digital signals from external devices such as switch signals and sensor status signals are input to the module. The internal circuit of the module processes and converts the input signals into a digital form th
READ MORE
Here are the general steps to calibrate a Yokogawa pressure transmitter:Preparation• Gather equipment: You need a precision pressure calibrator (with an accuracy at least three times higher than the required accuracy of the transmitter), a multimeter (to measure the current output), a suitable press
READ MORE The advantages of the E + H ultrasonic level meter series are as follows:1. High - precision measurement• The ultrasonic level meter uses advanced ultrasonic technology to achieve accurate measurement of liquid levels. It can provide precise level data, with a high measurement accuracy that can meet
READ MORE How can one choose a German FESTO solenoid valve that suits their own needs? Here are some suggestions:I. Clarify application requirements1. Fluid type:• Gas: If used to control gas, consider the properties of the gas, such as whether it is corrosive or flammable and explosive. For non-corrosive gas
READ MORE 